Shop parts by model
Choose your model to find mounts, rigging upgrades and replacement parts. If you’re looking at two parts that look almost alike, call our family’s Cincinnati shop at 513-984-1907. We’ve been helping boat owners here since 1978.
VoyaX
MOSSA 128 XPDL
The drive, battery and seat come with the kayak. These two accessories use the XPDL1 system.
- ThumbCon remote — Control the XPDL1 from your rod grip.
- VoyaX fish finder and transducer — Displays sonar on the MOSSA’s XPDL screen.
Bonafide
XTR130
Choose one bow mount to suit your motor position.
- Standard XTR130 bow mount — For a bow-motor setup. Check the bolt pattern on your motor or quick-release bracket.
- 90-degree XTR130 bow mount — Choose this version when the motor needs to sit across the bow.
- XTR130 electronics mounting plate — For mounting fish-finder electronics on the XTR130.
- PivotPro tandem seat kit — Adds a second seat with its swivel, base and hardware.
XTR140P
Our base kayak comes without the pedal drive. Call us if you want to price a pedal setup.
- PivotPro tandem seat kit — Adds a second seat with its swivel, base and hardware.
Hobie
Mirage Pro Angler 12 and 14
These accessories fit the factory H-Rail on the 2023–2026 models listed here. For drive repairs, tell us whether yours is a 180, 360 or 360XR.
- Adjustable H-Rail rod holder — Clamps to the factory H-Rail and adjusts for rod angle.
- H-Rail accessory mounting plate — Clamps to the H-Rail. The plate can be drilled for your accessory’s fasteners.
Native Watercraft
Titan X Propel 10.5 and 12.5
With the pedal drive installed, Native recommends the bow position for the Captain’s Bridge. Measure between your mounting points before choosing a width.
- 26-inch Captain’s Bridge — For a compact electronics setup. Maximum mounting span is 25 inches.
- 32-inch Captain’s Bridge — More room for larger displays. Maximum mounting span is 31 inches.
- Native bow motor mount — The bow plate for the Hammer 1210 and Titan X hulls. Check the motor bracket before ordering.
Hammer Propel 1210
Planning a bow motor? Start with the plate designed for the Hammer hull.
- Native bow motor mount — The bow plate for the Hammer 1210 and Titan X hulls. Check the motor bracket before ordering.
NuCanoe
Unlimited 12.5
The standard Unlimited uses its own bow and anchoring brackets.
- Bow motor mount · #7156 — Mounting plates and hardware for the standard Unlimited bow.
- Outboard motor bracket · #7106 — Stern bracket for an outboard setup. Check your motor against the hull’s rating.
- Anchor Wizard bow mount · #7336 — Bracket for the Anchor Wizard chute on the standard Unlimited.
Unlimited MAX
The MAX has an integrated bow motor mount. These are stern-rigging options.
- QuickConnect EPS foot-steer kit · #1728 — For a solo Unlimited MAX electric motor build. Tell us which motor you’re using so we can check the full setup.
- Outboard motor bracket · #7106 — Stern bracket for an outboard setup. Check your motor against the hull’s rating.
Old Town
Sportsman AutoPilot 120 and 136
These models use the Minn Kota motor. Match the prop kit to the motor in your boat.
- Minn Kota replacement prop kit · 01.1332.0092 — A spare prop and hardware for the AutoPilot motor.
- Motor deployment cord and handle · 01.1332.0078 — Replaces the cord used to lower and raise the AutoPilot motor.
- Rectangular Click Seal hatch · 01.1315.0647 — Replaces the hatch cover beneath the seat.
Sportsman PDL 106, PDL 120 and BigWater PDL 132
These models use the PDL pedal drive. The rectangular hatch sits beneath the seat.
- PDL replacement prop kit · 01.1332.0035 — A spare prop and hardware for the pedal drive.
- Rectangular Click Seal hatch · 01.1315.0647 — Replaces the hatch cover beneath the seat.
Sportsman 120 PRO PDL
For the PRO model equipped with the PDL pedal drive.
- PDL replacement prop kit · 01.1332.0035 — A spare prop and hardware for the pedal drive.
Sailboats
Hobie Getaway
For replacement running rigging, match the line to the job and the mast on your boat.
- Getaway jib sheet — A 32-foot, 5/16-inch replacement line for the jib.
- Getaway CompTip main halyard · 37651001 — For a Getaway mast with the fiberglass CompTip upper section.
Hobie Tandem Island
These selections fit the 2025 Tandem Island.
- Black Tandem Island trampoline kit — Adds deck space between the main hull and floats.
- Tandem Island fitted cover — Cut for the 2015 and newer Tandem Island hull.
Motors
Garmin Force Current
Both Force Current packages use the same motor-side plate. Kayak-side hardware depends on your hull.
- Bonafide stern mounting plate · AMOT420 — Fits the Force Current motor. Send us your kayak model to confirm the stern mounting surface and hardware before ordering.
Can’t find your model?
Send the model, year and a photo of the drive, rail or part you’re replacing. Our Blue Ash shop can help you match it. For sailboat hardware, use our sailboat parts request.
